Edge Node Wake-Up Procedure

Edge Node Wake-Up Procedure

Quick Reference
Edge Node Wake-Up Procedure
Urbit One Starter Kit

Important: The Edge Node is shipped in Stop Mode. This low-power shipping state protects the unit during storage and transportation. Before using the Starter Kit, the Edge Node must be awakened using the Windows wake-up utility.

Delivered State
Stop Mode

Required Computer
Windows 10 or 11

Connection
USB-C port

Wake-Up Instructions

1

Download the program

Download EdgeNodeWakeup.zip attached at the bottom of this document and expand the content on your pc.

2

Connect the Edge Node

Connect the Edge Node to a Windows 10 or Windows 11 computer using the USB-C port.

3

Run the utility

Execute EdgeNodeWakeup.exe on the Windows computer. Allow the application to run if Windows displays a security confirmation.

4

Confirm device detection

Wait for the "Gateway Found" response and verify LED activity on the Edge Node.

5

Validate platform activity

Open the Starter Kit dashboard and confirm that the Edge Node shows activity or recent communication.

Expected Result: The Edge Node is detected by the utility, LED activity is visible, and the Starter Kit dashboard begins showing activity from the Edge Node after few minutes.

Annex A - Troubleshooting

• Utility does not open: Confirm that the computer is running Windows 10 or 11.

• No Gateway Found message: Check the USB-C connection and try a different USB port or cable.

• No LED activity: Keep the unit connected for a few minutes and run the utility again.

• No dashboard activity: Allow time for the first communication and refresh the dashboard.

Annex B - Support Information
When contacting support, include the following information:

• Edge Node ID or Serial Number

• Starter Kit customer/company name

• Screenshot of the wake-up utility result

• Description of LED behavior

• Dashboard URL or dashboard name

Open a support ticket using the question mark button at the bottom right corner of your dashboard or sending an email to: support@urbit.us

Keep this sheet with the Urbit One Starter Kit documentation. The EdgeNodeWakeup.exe utility is required before the first field validation.

    • Related Articles

    • Urb-IoT Edge Node Datasheet

      Urb-IoT Edge Node – Technical Datasheet Physical & Environmental Specifications · Operating temperature: −20°C to +85°C · Humidity: 0–95% non‑condensing. · Shock-resistant polycarbonate housing. Power · Internal 60.48Wh battery for up to 72 hours of ...

    • Urbit ONE Admin Dashboards Manual v1 2

      Urbit ONE Administrator Dashboards Manual | v1.2 Administrator Dashboards Manual Urbit ONE Starter Kit - Evaluation Kit, Edge Node, Tracker T1000, and Smart Plug WS523 Prepared for administrator users responsible for monitoring, configuration, alarm ...

    • End User Starter Kit Guide

      End User Starter Kit Guide Monitoring, alarms, commands, and operational health Audience This guide is written for end users and operators who monitor the Urbit One Starter kit, review alarms, adjust customer-facing alarm behavior, and send ...

    • Starter Kit - Quick Registration Reference

      Starter Kit - Quick Registration Reference Initial Admin User Registration Thank you for acquiring the Urbit One Starter Kit. This kit includes a Quick Registration Reference to activate the initial administrator account required to access the Urbit ...